Protect water systems. Improve reliability. Control operating cost.
UDAAQ provides a comprehensive range of boiler-water, cooling-water, reverse-osmosis and speciality chemicals. The range is supported by detailed product literature, application guidance and treatment-selection assistance for industrial utilities and process-water systems.
Detailed chemistry for every major utility-water system.
Water-treatment programmes must be selected around feedwater quality, metallurgy, operating pressure, temperature, cycles of concentration, membrane design and microbiological risk—not simply by product name.
Boiler Water Treatment
Boiler water treatment is essential for controlling scale, corrosion, dissolved oxygen, sludge and condensate-system attack. A properly selected programme helps maintain heat-transfer efficiency, reduce tube failures, support stable steam generation and extend boiler and condensate-system life.
Explore category
Cooling Water Treatment
Cooling-water systems continuously concentrate dissolved salts and collect airborne contamination. A balanced programme addresses scale, corrosion, suspended solids, biofilm and microbiological growth so that heat exchangers, condensers, piping and cooling-tower fills remain cleaner and more reliable.
Explore category
RO Chemicals
Reverse-osmosis performance depends on controlling mineral scale, suspended solids, organic fouling, microbiological growth and membrane cleaning. Correct chemical selection supports stable permeate flow, salt rejection, cleaning frequency and membrane service life.
Explore category
Speciality Chemicals
Speciality chemicals solve application-specific problems such as foaming, surface cleaning, resin fouling, sanitisation, silver-hydrogen-peroxide treatment and process-industry challenges where standard boiler, cooling or RO formulations are not sufficient.
Explore categoryScale, corrosion, fouling and microbes directly affect plant performance.
Even a thin deposit on a heat-transfer surface can increase energy demand. Corrosion causes leakage and equipment failure. Biofilm restricts flow and shields microorganisms. RO fouling reduces permeate production and increases cleaning frequency.
Protect heat transfer
Control mineral scale, sludge and biological deposits that insulate boiler tubes, condensers and heat exchangers.
Manage corrosion
Maintain suitable chemistry and inhibitor residuals to reduce oxygen, carbonic-acid and under-deposit attack.
Control microbiology
Use biocides, biodispersants and monitoring to manage bacteria, fungi, algae and biofilm in circulating systems.
Stabilise RO output
Control scale and fouling, monitor normalised performance and clean membranes using compatible chemistry.
Explore detailed product pages.
Explore focused solutions for scale, corrosion, microbiological control, membrane protection and specialised industrial-water-treatment requirements.
WT1010 · Boiler Water TreatmentFood Grade Fire Tube Boiler Multipurpose Chemical
Our multipurpose boiler water treatment chemicals for Fire Tube Boiler have been designed to offer multi-component boiler protection in a single chemical product. It is a special product designed to prevent scale and corrosion on the waters
WT1020 · Boiler Water TreatmentFood Grade Water Tube Boiler Multipurpose Chemical
Our multipurpose boiler water treatment chemicals for Water Tube Boiler have been designed to offer multi-component boiler protection in a single chemical product. It is a special product designed to prevent scale and corrosion on the water
WT1462 · Boiler Water TreatmentFood Grade Boiler Alkalinity Builder
The control of water pH and alkalinity levels is very important in low- and medium-pressure boilers to reduce corrosion. Depending on the natural feed water alkalinity it is often necessary to add an alkalinity builder in order to establish
WT1153A · Cooling Water TreatmentFood Grade Chiller Plant Cleaner Chemical
Our Closed System cleaning system has been specially developed to effectively remove deposit sludge / foulants from the system. It is a blend of specific chelating agents designed for removal of Iron Calcium and Magnesium based deposits fro
WT1153B · Cooling Water TreatmentFood Grade Chiller Plant Cleaner Chemical
Our Closed System cleaning system has been specially developed to effectively remove deposit sludge / foulants from the system. It is a blend of specific chelating agents designed for removal of Iron Calcium and Magnesium based deposits fro
WTL300 · RO ChemicalsPH Reducer
NULL
Chemicals work best as part of a measured control programme.
1. Analyse the water
Review hardness, alkalinity, silica, chlorides, TDS, iron, pH, microbiology and other system-specific parameters.
2. Understand the system
Record boiler pressure, cooling cycles, metallurgy, temperatures, flows, membrane configuration and operational constraints.
3. Select and dose
Choose compatible chemistry, establish initial dosage and confirm the recommended injection point and dosing method.
4. Monitor residuals
Track treatment residuals, pH, conductivity, corrosion, microbial counts, performance trends and blowdown or recovery.
5. Optimise safely
Adjust dosage only after reviewing measured system response and the relevant product literature and safety data.
6. Document results
Maintain logs of water analysis, dosage, operating data, cleaning frequency and equipment condition to verify programme value.