Food Grade Chiller Plant Cleaner Chemical
Our Closed System cleaning system has been specially developed to effectively remove deposit sludge / foulants from the system. It is a blend of specific chelating agents designed for removal of Iron Calcium and Magnesium based deposits from cooling water systems where it is not practical to remove the tower packing. It is found to be most effective in clean
Food Grade Chiller Plant Cleaner Chemical
Our Closed System cleaning system has been specially developed to effectively remove deposit sludge / foulants from the system. It is a blend of specific chelating agents designed for removal of Iron Calcium and Magnesium based deposits from cooling water systems where it is not practical to remove the tower packing. It is found to be most effective in cleaning where deposition or oil contamination is suspected of reducing heat transfer or restricting flow available. Deposits are softened and solubilized as our cleaner penetrates the deposits and enhances the action of cooling water dispersants to slough off remaining deposits which are later removed during a blow down or draining. WT1153A - Closed System Chemical De-Scalant and WT1153B - Closed System Polymeric Dispersant to be used in Combination for treament.
Where the product fits in a treatment programme.
Final selection and dosage should be based on current water analysis, system operating data, compatibility and product literature.
Typical applications
- Open recirculating cooling towers
- Closed chilled-water and process-cooling loops
- Evaporative condensers and air washers
- Heat exchangers and condenser-water circuits
- Food, pharmaceutical, HVAC and industrial utilities
- Online or offline cleaning programmes
Advantages and treatment objectives
- Food Grade Cooling Water Treatment
- NSF Certified for Food Processing Cooling Treatment
- Environment-friendly and Non-Toxic Cooling Treatment
- Economical and Ready to use in 35/50 KG Pack
- High Tolorence and Chemical Stability
- Easy to handle with Rapid Action for Instant solution
- Complete Cooling Tower Protection to Enhance system life
- Supports efficient heat transfer
- Helps control scale and corrosion
- Reduces fouling and deposit accumulation
- Supports cleaner tower fills and piping
- Can reduce cleaning frequency when properly controlled
- Helps soften and mobilise deposits for removal during flushing or blowdown
Parameters to monitor
- Make-up and circulating-water hardness
- pH, conductivity and cycles of concentration
- Corrosion coupons or probes
- Microbiological counts and biofilm condition
- Approach temperature and heat-exchanger pressure drop
- Biocide residual and blowdown performance
Specification and product documents.
Published specification
- Form: Liquid
- Packing: 35KG / 50KG HEDP Polycan
- HSN: 38249022
- Refer to Product Literature for Complete Product Specification
Product literature
Safe implementation
Review the current TDS and SDS before storage, handling, dilution or dosing. Confirm material compatibility, PPE, dosing point and treatment residuals with the site water-treatment specialist.
Common implementation questions.
How is the correct dosage selected?
Dosage depends on system volume or flow, water analysis, operating pressure or recovery, contaminant loading and the target residual. Start from the current product literature and optimise using measured results.
Can this product be selected only from the product name?
No. Similar problems can have different causes. Confirm the system type, water chemistry, metallurgy, operating conditions and existing treatment before changing the programme.
What should be monitored after starting treatment?
Monitor the application-specific parameters listed above, together with dosage, residual, system performance and equipment condition. Trend data is more useful than a single isolated reading.
Where can I obtain the latest TDS, MSDS or certificate?
Use the document links on this page where available, or contact Rakiro for the latest controlled copy.