Food Grade Ion Exchange Resin Cleaner
Ion exchange resins can become polluted or contaminated with suspended solids slime bacteria and numerous organic or microbiological matters over a time period. Fouling of the resin by iron and organic build up cannot be removed by normal regeneration procedures and can cause gradual performance losses. Our Food grade resin cleaner is especially designed to
Food Grade Ion Exchange Resin Cleaner
Ion exchange resins can become polluted or contaminated with suspended solids slime bacteria and numerous organic or microbiological matters over a time period. Fouling of the resin by iron and organic build up cannot be removed by normal regeneration procedures and can cause gradual performance losses. Our Food grade resin cleaner is especially designed to remove bound iron from iron fouled resins and prevent accumulation of fouling conditions to extend the resin life significantly. It will ensure optimum exchange capacity and also keep the softener components clean when used on a regular basis.
Where the product fits in a treatment programme.
Final selection and dosage should be based on current water analysis, system operating data, compatibility and product literature.
Typical applications
- Industrial process-water systems
- Food, beverage and pharmaceutical facilities
- Utility and housekeeping applications
- Water-treatment plants and production systems
- Application-specific cleaning and sanitisation programmes
Advantages and treatment objectives
- Food Grade Resin Cleaner
- NSF Certified for Food Processing Ion Exchange Resin
- Environment-friendly and Non-Toxic Resin Treatment
- Economical and Ready to use in 35/50 KG Pack
- High Tolorence and Chemical Stability
- Easy to handle with Rapid Action for Instant solution
- Complete Resin Cleaning to Enhance system life
- Solves targeted operational problems
- Supports cleaner and more reliable process operation
- Can reduce manual cleaning or unplanned intervention
- Available in practical industrial packing
- Can be integrated into site-specific treatment programmes
Parameters to monitor
- Application-specific chemical residual
- Visual cleanliness and deposit condition
- Foam level or process stability
- Microbiological results where relevant
- Operating cost and cleaning frequency
- Process quality and equipment performance
Specification and product documents.
Published specification
- Form: Liquid
- Packing: 35KG / 50KG HEDP Polycan
- HSN: 38249022
- Refer to Product Literature for Complete Product Specification
Product literature
Safe implementation
Review the current TDS and SDS before storage, handling, dilution or dosing. Confirm material compatibility, PPE, dosing point and treatment residuals with the site water-treatment specialist.
Common implementation questions.
How is the correct dosage selected?
Dosage depends on system volume or flow, water analysis, operating pressure or recovery, contaminant loading and the target residual. Start from the current product literature and optimise using measured results.
Can this product be selected only from the product name?
No. Similar problems can have different causes. Confirm the system type, water chemistry, metallurgy, operating conditions and existing treatment before changing the programme.
What should be monitored after starting treatment?
Monitor the application-specific parameters listed above, together with dosage, residual, system performance and equipment condition. Trend data is more useful than a single isolated reading.
Where can I obtain the latest TDS, MSDS or certificate?
Use the document links on this page where available, or contact Rakiro for the latest controlled copy.